This text is machine translated.Robust and fast datalogger for recording temperature and air humidity. Via USB-interface the recorded data can be loaded on to the PC without any problem and the measured values can be analysed with the help of the software.
The PID temperature controller ESM -4420 can with the universal process control input, control outputs and selectable alarm functions for many applications. The tax direction can be set to ON-OFF, P, PI, PD or PID can be set. The PID temperature controller also has a PID Self-optimization function selftune (step feedback). The control outputs can be used for heating, cooling and alarm functions can be programd.This text is machine translated.
The temperature controller ESM -3710 for type J thermo-elements is an ON-OFF temperature controller with programmable min/max values and output relay for heating and cooling applications.This text is machine translated.
In addition to the resistors are used to measure direct currents. The shunt resistor is a voltage proportional to the current, which then, for example, with a moving-coil instrument can be displayed. The resistances are required in Class 0.2 according to DIN 43 703. The shunt resistor flowing through transmission power generates a voltage drop with a parallel, the pre-measuring device is measured. In addition to the resistors are adjusted so that the nominal current an exactly defined voltage (60A for type B2) drops.This text is machine translated.
This conductive bench mat set forms the cornerstone of every EPA workplace and includes a 180 cm earth cable. Grounding via alligator clips or banana jacks. The mat consists of a dissipative vinyl top and a foam-coated anti-slip bottom that keeps the mat safely in place. Also comes with a wrist band and a matching cable
Voltage of 1V - 1000 V AC TRUE RMS/1,200 V DC (LCD)The display stages: 50, 120, 230, 400 V AC/DC (LED)Backlit double display for display of frequency (small display) and voltage (large display) or resistanceOptical continuity test up to 100 kO (yellow LED)Resistance measurement: 0.1 kO - 300 kO (LCD)Diode test: 0.3 V - 2 V (LCD)Rotating field direction (green LED)/phase testing (red LED),Polarity check (LCD)Frequency measurement: 1 Hz - 1,000 HzDirect display without pushbutton operation (high-resistance testing)Load connection via push button (low-resistance testing)Conscious triggering of the FI circuit-breakerVibration alarm in the test handleMeasuring points and display lightingProtection class IP 65 (dust-proof/splash-water protected)Robust housing design with rubberised grip areaOvervoltage category CAT IV 600 V, CAT III 1000 VIncludes 2 x 1.5 V micro batteries (LR03/AAA) (voltage display from 50 V even when the batteries are empty!)Tested and approved according to DIN EN 61243-3 and VDE 0682-401:2011-02Display LED/LCD The display stages 1 - 1000 V/AC/1200 V DC Frequency range 1 - 1000 Hz Acoustic and optical continuity test buzzer + LED 0 - 100 kO Diode test 0.3 -2.0 V Resistance measurement range 0.1 - 300 kO Rotary field test green LEDs (right/left). Single-pole outer conductor test red "flash" LED Polarity check LED (+/-) Cable breakage detector yellow LED (blinking) Load connection via push-button is = 550 mA (1000V), 30 mA RCD tripping Vibration alarm yesMeasuring point lighting white LED Protection class IP 65This text is machine translated.
Two-pole voltage detector The main task of the voltage tester is the determining the voltage impotence. A 2-pole voltage tester is the only permissible test instrument to meet the requirements of the Labor Protection Act. According to VDE standard 0682 Part 401. High peak voltage stability. For every area of application the right tester.This text is machine translated.
The measurement adapter C.A 753 allows measurements in complete safety to shockproof sockets or european 2P+E-sockets.This text is machine translated.
Current transformers of the series 855 are inductive, after the transformer principle of 1-conductor current converter. Due to the applied current transformers of this type are suitable measuring principle for exclusive use in alternating current networks.This text is machine translated.
The compact divisible cable conversion current transformers are specially designed for retrofitting in existing systems. Cable conversion converter find in particular application in cases in which the current path will not be interrupted. The accuracy of the cable conversion converter leads to especially precise current measurements. The cable conversion current transformers are with the specified rated power at the end of the cable can be loaded. All transformers are designed with color-coded cable. Two enclosed UV resistant cable ties guarantee a secure and easy installation.This text is machine translated.